> For the complete documentation index, see [llms.txt](https://docs.enginsight.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.enginsight.com/docs/manual/english/installation-and-configuration/system-requirements/komponentenserver-hacktor-watchdog-observer.md).

# Component Server for Hacktor, Watchdog, and Observer

Here you will find the system requirements and firewall rules for Component Servers running the software components Hacktor, Watchdog, and Observer.

{% hint style="warning" %}
**Please note:** Installing the Hacktor, Watchdog, and Observer components requires virtual machines (VMs). While all components can be deployed on the same system, we recommend running them **on separate servers**.
{% endhint %}

***

## System Requirements

{% hint style="warning" %}
**Please note:** The requirements listed below are **minimum requirements**. For example, an Observer running with the specified resources can monitor up to approximately 30 endpoints. If you need to monitor more endpoints, additional resources should be allocated. The same applies to Hacktor when increasing the number of concurrent scans.
{% endhint %}

<table><thead><tr><th width="194.875">Category</th><th width="275.1484375">Requirements: Dedicated installation</th><th>Requirements: Shared Server</th></tr></thead><tbody><tr><td>System</td><td><p>VM</p><div data-gb-custom-block data-tag="hint" data-style="warning" class="hint hint-warning"><p><strong>Please note</strong>: Access to the VM must be available either via Secure Shell (SSH) or VMware Tools.</p></div></td><td><p>VM</p><div data-gb-custom-block data-tag="hint" data-style="warning" class="hint hint-warning"><p><strong>Please note</strong>: Access to the VM must be available either via Secure Shell (SSH) or VMware Tools.</p></div></td></tr><tr><td>Operating System</td><td><p>Linux: Debian 12, 64bit</p><div data-gb-custom-block data-tag="hint" data-style="danger" class="hint hint-danger"><p><strong>Please note</strong>: Running these components on Windows is not supported.</p></div></td><td><p>Linux: Debian 12, 64bit</p><div data-gb-custom-block data-tag="hint" data-style="danger" class="hint hint-danger"><p><strong>Please note</strong>: Running these components on Windows is not supported.</p></div></td></tr><tr><td>CPU</td><td>2 cores</td><td>4 cores</td></tr><tr><td>Memory (RAM)</td><td>Minimum 2 GB</td><td>Minimum 4 GB</td></tr><tr><td>Storage</td><td>Minimum 20 GB</td><td>Minimum 50 GB</td></tr><tr><td>Minimum Number of Processes (<code>numproc</code>)</td><td>20,000</td><td>20,000</td></tr><tr><td>Maximum Number of Processes (<code>numproc</code>)</td><td>Unlimited</td><td>Unlimited</td></tr></tbody></table>

***

## Firewall Rules

Component Servers running Hacktor, Watchdog, and Observer require the following firewall rules:

<table><thead><tr><th width="140.73046875">Direction</th><th width="179">Target</th><th width="136.71484375">Port</th><th width="115.35546875">Protocol</th><th>Notes</th></tr></thead><tbody><tr><td>Outbound</td><td>Update Server</td><td><p>443 (HTTPS)</p><p>80 (HTTP – explicitly not recommended!)</p></td><td>TCP</td><td>Updates for the operating system and the Enginsight platform</td></tr><tr><td>Outbound</td><td>Application Server</td><td><p>443 (HTTPS)</p><p>80 (HTTP – explicitly not recommended!)</p></td><td>TCP</td><td></td></tr><tr><td>Outbound</td><td>DNS server</td><td>53</td><td>UDP</td><td></td></tr></tbody></table>

### Required Domains

The following domains must be reachable from the Component Server:

* Debian mirror server that was selected during installation (default: deb.debian.org)
* security.debian.org
* ntp.org

***

## Additional Requirements: Watchdog

Watchdog uses ping monitoring, port monitoring, and network sniffing to provide agentless monitoring capabilities.

### Required Ports

Continuous monitoring by Watchdog can only be guaranteed if the following ports are not blocked by firewall rules. Open these ports where necessary:

| Port Numbers                                                                                                                                                                                                                                                                       |
| ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 21, 22, 23, 25, 51, 53, 80, 88, 110, 111, 135, 137, 138, 139, 143, 160, 161, 443, 445, 465, 515, 587, 631, 993, 995, 1433, 1537, 1538, 1541, 1542, 1553, 1521, 2869, 3306, 3389, 3910, 3911, 5357, 5432, 5672, 5984, 6379, 6443, 7000, 7001, 7210, 8080, 8181, 9100, 10250, 27017​ |

### Network Sniffing

For network sniffing, Watchdog uses the Address Resolution Protocol (ARP). To enable this functionality, the **Promiscuous Mode** must be enabled on the network interface of the server where Watchdog is installed.

***

## Additional Requirements: Observer

Observer is responsible for agentless monitoring of websites and domains.

### On-Premises Installation

Continuous monitoring with Observer in an on-premises installation can only be guaranteed if the following ports are not blocked by firewall rules. Open these ports where necessary:

| Port numbers                                                                                                                                                                                                                          |
| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 21, 22, 23, 25, 53, 80, 106, 110, 111, 123, 135, 137, 138, 139, 143, 161, 389, 443, 445, 465, 587, 993, 995, 1433, 1512, 1723, 2222, 2483, 2484, 3306, 3389, 4369, 5432, 5666, 5672, 5984, 6379, 8080, 8443, 8983, 9200, 9300, 27017​ |

### Enginsight SaaS Platform

Continuous monitoring through the Enginsight SaaS platform can only be guaranteed if the following IP addresses are not blocked by firewall rules. Allow these IP addresses where necessary:

* 164.90.185.111
* 164.90.231.250
* 142.93.119.55&#x20;
* 142.93.119.52&#x20;
* 138.68.93.235&#x20;
* 138.68.71.130&#x20;
* 139.59.155.98

Alternatively, you can allow all A records of the domain *observers.enginsight.com*.

***

## Further Resources

**Knowledge Base**

* [Enginsight cannot connect to the real-time server. What can I do?](https://docs.enginsight.com/docs/knowledge-base/english/troubleshooting/enginsight-cannot-connect-to-the-real-time-server-what-can-i-do)

***
